Projects

Kaolin Transfer Pump

[+] click to enlarge

Duty: 19.2m³/hr. at 12-15 bar

Product: Kaolin Clay Slurry

Selection: Orbit model D5403 pump of full 316 SS wetted construction, fitted with a 316 SS unplated rotor, white nitrile stator and a packed gland. To minimise clay build up in the suction port the pump was fitted with a SS Auger onto the coupling rod and a port on the suction tube to allow high pressure washing of the suction tube.

The pump was direct driven by a 22 kW 415v 50Hz 3 phase IP 55 class ‘F’ geared electric motor at around 460 rpm. The pump and motor combination was mounted on a painted steel baseplate and included a flexible jaw type coupling and sturdy coupling guard.
back to top
Waste Oil Pump

[+] click to enlarge

Duty: 50 m³/hr @ 30m TDH

Product: Waste Oil

Selection: Orbit model B9601 pump of cast iron construction, fitted with an EN8/HCP rotor, Nitrile stator and a packed gland. Pump was driven by an 11 kW 415 v electric motor mounted on a painted steel baseplate with a belt drive assembly and sturdy belt guard provided.
back to top
Trailer Mounted Mud Pump

[+] click to enlarge

Duty: 34 m³/h @ 6 bar

Product:Drillers Mud

Selection:Orbit model B9602 pump of Cast Iron construction fitted with a Nitrile Stator, EN8/Hard Chrome Rotor and a Packed Gland.
back to top
Hydrostatic Pressure Test Pump

[+] click to enlarge

Duty: 30 l/hr at 2,100 kPa TDH.

Product: Clean cold water

Selection:Orbit model M45 Helical Rotor Pump direct driven by a 0.37kW 6 pole 240v single phase motor. The pump was supplied complete with base, lifting handles, motor cable and plug. Piping included a Pressure Relief Valve, Pressure Gauge, Check Valve and Isolating Ball Valve.
back to top
For our other projects we have completed, please contact us for further information